International Alternative Energy Center
International Alternative Energy Center
Home | Profile | Register | Active Topics | Active Polls | Members | Private Messages | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?




 All Forums
 Technical Help and Questions
 Battery Info and Questions
 Calculating Capacity of an Used / Unknown Battery
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

kcarring
Moderator


Canada
1057 Posts

Posted - November 19 2012 :  11:31:37  Show Profile Send kcarring a Private Message  Reply with Quote
So I did a first round of pulsing a battery with a TSO, took it to 15.2V (almost), unfortunately my circuit quit, so I couldn't hold it at a cold boil as long as I would have liked to, but...

After discharging at approximate C40 rate, the battery, a trojan 1275 C20 rated at 150 aH, was reading (loaded) 11.79V after 13.5h of running the 50 watt, or 4.3A load.

This equates to 58.05 amp hours. After resting 20 minutes, it recovered to 12.1V (one should wait 2 hours or more, though, for it's final evaluation)


State of Charge 12 Volt battery Volts per Cell
100% 12.7 2.12
90% 12.5 2.08
80% 12.42 2.07
70% 12.32 2.05
60% 12.20 2.03
50% 12.06 2.01
40% 11.9 1.98
30% 11.75 1.96
20% 11.58 1.93
10% 11.31 1.89
0 10.5 1.75

On the chart, which is only a guideline, this would mean that the battery was at approximately 50% discharged. Rather than take it right down to 10.5V, I can estimate that 12.1V is close to 50% discharged. that'd mean about 116 Ah. Given that the C20 is 150, C40 maybe as high at 175 aH, and we could call this battery 66-70% of it's rated capacity.

That's how I do it... and remember, this is just for deep cycle batteries.

If you have a better way, let me know! :)

~~~~~~~~~~~~~
You wouldn't laugh at my igloo if you knew how cold my beer is!

Edited by - kcarring on November 19 2012 11:34:08

Google AdSense

USA
Mountain View


ron_o
Moderator



United Kingdom
1052 Posts

Posted - December 13 2012 :  15:09:14  Show Profile Send ron_o a Private Message  Reply with Quote
Here's a link to a circuit that gives a guide to battery condition ( also included is a desulphator circuit )

You must be logged in to see this link.

ron
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
International Alternative Energy Center © 2000-2009 ForumCo.com Go To Top Of Page
This page was generated in 0.14 seconds. Snitz Forums 2000
RSS Feed 1 RSS Feed 2
Powered by ForumCo 2000-2008
TOS - AUP - URA - Privacy Policy
ForumCo Free Blogs and Galleries
Signup for a free forum or Go Banner Free