International Alternative Energy Center
International Alternative Energy Center
Home | Profile | Register | Active Topics | Active Polls | Members | Private Messages | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?




 All Forums
 Forums
 Magnetic Motors
 Mostly Permanent Magnet Experiment
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Jet
Junior Member


Canada
129 Posts

Posted - April 14 2012 :  12:23:09  Show Profile  Visit Jet's Homepage Send Jet a Private Message  Reply with Quote
Mostly Permanent Magnet Experiment

This is replication of Gotoluc experiment over at Overunity Forum. I want to thank Luc for is ingenious tinkering.

Here, in this video, I have used a regular 12 Volts relay that I gutted out. I'm building something different than Gotoluc, but with the very same principles. I'm building a relay that provides on/off switching, and does not stay energized to do so. It only needs a pulse to turn on or off. It has many funtions or purposes. It is to be used to eliminate phantom power. It is able to connect through its contacts, 120/240 Vac equipment. And can function off very low power source. Gotoluc is doing something different. He is building a magnet motor that is highly efficient.




Gotoluc has a series of video that you won't want a miss! Here are the first parts. See video below, Part A & B.

Mostly Permanent Magnet Motor Part A


Mostly Permanent Magnet Motor Part B


Edited by - Jet on April 14 2012 14:09:57

Google AdSense

USA
Mountain View


TinMan
Advanced Member



4082 Posts

Posted - April 16 2012 :  06:59:27  Show Profile Send TinMan a Private Message  Reply with Quote
Hi Jet
We need this man in our forum lol.
I did build a similar design a long time ago ,but not useing AC as he has done.
You should give him an invite to our humble little forum (that is growing faster than any other on the net lol)
This has also given me an idea for a brand new SSG type setup--work has already begun lol.


swim at 90 degrees to the current and gain speed in two directions

skype-thetinman.69
Go to Top of Page

Jet
Junior Member



Canada
129 Posts

Posted - April 16 2012 :  11:31:58  Show Profile  Visit Jet's Homepage Send Jet a Private Message  Reply with Quote
quote:
Originally posted by TinMan

Hi Jet
We need this man in our forum lol.
I did build a similar design a long time ago ,but not useing AC as he has done.
You should give him an invite to our humble little forum ...



Yeah, for sure.
I invited him already.
He is over at the overunity forum.

Cheers,
Jet
Go to Top of Page

TinMan
Advanced Member



4082 Posts

Posted - April 17 2012 :  05:49:55  Show Profile Send TinMan a Private Message  Reply with Quote
well no reason he cant be a member of both


swim at 90 degrees to the current and gain speed in two directions

skype-thetinman.69
Go to Top of Page

gotoluc
New Member



Canada
17 Posts

Posted - July 23 2013 :  21:58:56  Show Profile Send gotoluc a Private Message  Reply with Quote
Hi Jet and TinMan,

in case you didn't see my new topic on this forum of the mostly magnet motor design I came up with some years back, here are the details I posted.

The idea of this motor design was to mostly use the flux of powerful Neodymium Magnets we now have, since in a standard magnet motor we cannot get a power gain just by upgrading the old ceramic magnets to Neodymium Magnets, as we would also have to add more power to the motor coils to overcome the extra attraction force the Neo Magnets have.
However, in my motor design there is no sticky spot, so the more flux the magnets have the more mechanical power the motor has without changing the input power.

I have made a new video which demonstrates this and also demonstrates new improvements to the magnet and cores positions which takes full advantage of both Permanent Magnet Poles and of the Electromagnet Poles.

This improvement basically double the mechanical output power of my first design without any increase to the input power.

The video should be self explanatory

You must be logged in to see this link.

Luc

Edited by - gotoluc on July 23 2013 22:08:15
Go to Top of Page

The_Architect
Average Member



USA
327 Posts

Posted - July 24 2013 :  12:16:36  Show Profile  Visit The_Architect's Homepage Send The_Architect a Private Message  Reply with Quote
Luc I posted a comment on that video about the position of your scale connectors as they are going to cause drag on the core. if you had moved them to opposite corners of the coil instead of both on the top corners I think you might have seen less drag showing up in the experiment :)

Violence is the last refuge of the incompetent
You must be logged in to see this link.
Go to Top of Page

Unobtainium
New Member



5 Posts

Posted - July 28 2013 :  11:14:20  Show Profile Send Unobtainium a Private Message  Reply with Quote
Interesting work, gotoluc. On the Do It Yourself scale, maybe the principle can be used to drive a small bike or a boat at first (I know I'll try, after more thinking). I've done just the first basic lifting experiment with the solenoid and magnets arrangement & will do measurements when more gear arrives. Looking at your work I am reminded of the motors of QM Power (the guys working on Joe Flynn's concepts) & maybe the one of Jack Hildenbrand. :) Keep it up!

I agree with The Architect regarding the positioning of the straps on the core, maybe the friction was unnecessarily increased.

Edited by - Unobtainium on July 28 2013 11:20:22
Go to Top of Page

everetti
New Member



USA
6 Posts

Posted - June 30 2016 :  09:08:49  Show Profile Send everetti a Private Message  Reply with Quote

Posted - June 29 2016 :  22:26:37           hi guys, new member here. I have watched many YouTube videos showing the different magnetic motors and their exposure as frauds. what never changed for me was the concept of using magnetic forces to attract and repel. I was just driving down the road and thought of the motion of the engine. the pistons compress the fuel air mix and a spark set off a explosion that drives the piston away. this action when used in many different configurations has been very successful when creating motion. 
now.... consider having cylindrical magnets polarized down the length top to bottom... side a attracts ..side b repels.. place them in a piston like harness but with a twist. have two sets of them... have the center of the engine the focus point of the attraction. attraction pulling them together... then SPIN them to their repelling side to push back out!
used in a series they would function as a motor.
I conceived of it but do not have the engineering knowledge to attempt it. the idea is to have the bottom of the magnets attached to the crankshaft on a moving platform that drives the generator and a second set of gears(?)attached to the top that can spin the magnet to the repel side. again with only my imagination I can only visualize the motor not build one.

Jenn Spencer

Jenn Spencer
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
International Alternative Energy Center © 2000-2009 ForumCo.com Go To Top Of Page
This page was generated in 0.25 seconds. Snitz Forums 2000
RSS Feed 1 RSS Feed 2
Powered by ForumCo 2000-2008
TOS - AUP - URA - Privacy Policy
ForumCo Free Blogs and Galleries
Signup for a free forum or Go Banner Free