International Alternative Energy Center
International Alternative Energy Center
Home | Profile | Register | Active Topics | Active Polls | Members | Private Messages | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?




 All Forums
 General Discussion
 The Frauds and The Hopefuls
 NOT PMH
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Jerry Volland
Junior Member


USA
76 Posts

Posted - December 07 2016 :  08:57:45  Show Profile Send Jerry Volland a Private Message  Reply with Quote
quote:
Originally posted by TinMan

And they say it cant do any usefull work?
This need's looking into further



Late in the video the guy taps an alligator clip to the side of the base and says: "See? It's not magnetic anymore." He's got magnets embedded in the base and is using the horseshoe as the holder. If the electromagnet coils are doing anything, they're rerouting the flux in the base.

This video has nothing to do with Leedskalnin's work.

-----

"Use your own free will or someone else will use it for you." - O'Sensei Steve Armstrong, Grand Master, Ishinryu Karate

"Fu*k the Establishment" - Bob Dylan and various other members of my generation

Google AdSense

USA
Mountain View


ron_o
Moderator



United Kingdom
1052 Posts

Posted - December 07 2016 :  20:38:25  Show Profile Send ron_o a Private Message  Reply with Quote
Hi Jerry
It's not a hoax , first time i saw it that's exacly what i thought
but it isn't
If you make a PMH and give it a pulse of electricity
it does indeed perform as per video. Also if you connect a voltmeter
across the windings ( battery removed ) the meter will register zero volts
if you remove the keeper a voltage spike will register on the meter

ron
Go to Top of Page

Jerry Volland
Junior Member



USA
76 Posts

Posted - December 13 2016 :  00:14:40  Show Profile Send Jerry Volland a Private Message  Reply with Quote
Ed Leedskalnin's technology is remarkable. There's no doubt the PMH works. But it has to use Leedskalnin's own system if the video is going to qualify. What Master Ed did was use a momentary tap for the power on. This works because the switch on briefly produces a rising potential. Increasing a potential produces some kind of associated force, during the increase interval. And this force does have a counter reaction, in the form of cemf. Cemf exists only during the rising part of a potential's amplitude, and is caused by the changing. This is important from the perspective of his world of magnetic particles (Tesla would say paramagnetic corpuscles) running around the horseshoe in opposite directions, with the magnetic polarities determined by the north pole or south pole type of rotation involving the local ether field.

If you want to do some work, you can actually see these magnetic particles in an ignition coil spark. Next to a well insulated hard drive magnet, with the spark flowing from one end of the magnet towards the other, at the very center of the spark is a stream of tiny yellow spheres. These spheres are the south pole magnetic particles. It takes two out of phase potentials and a flux line to make these spheres. The flux line is already in the horseshoe, due to an interaction with the earth's field. (Steven Mark also makes this claim.) The rising emf has to be there as well as the flux line. And every time the spark crackles it jiggles some cemf onto the centered flux line, in a small area. Also, when you add a field of emf and cemf together, what's produced by the sudden on impulse is actually called a floating flux field. The positive flux lines are just floating in and around the conductor, existing as segments of what would normally be larger rings of flux circling through some nearby magnetic material. These floating flux lines only manifest in the medium of the longitudinal field and this limits their extent. But you still have to have a normal flux line for the inter potential static to roll around on, as it streams along. The secret then lies in the expression: "Before Longitudinal Energy, Static Spins", which has the interesting acronym 'bless'.

So none of this works if you just turn the power on and leave it going. But the video is still demonstrating work. The magnetically suspended weight's mass is being held in spite of the planetary gravity's downwards acceleration. This acceleration does occur to some extent anyway, in spite of the denied fall. The magnetically clamped mass is moving down away from its straight line through space inertial trajectory, so there is mass times acceleration through the shorter distance. Opposing a force requires a counter force, which is the defined work.



-----

"Use your own free will or someone else will use it for you." - O'Sensei Steve Armstrong.

>>You don't have to go TO the edge to go past it.<<
Go to Top of Page

ron_o
Moderator



United Kingdom
1052 Posts

Posted - December 24 2016 :  17:49:26  Show Profile Send ron_o a Private Message  Reply with Quote
Hi Jerry
Sorry for late reply
Intresting comments regarding magnetic particles transfer
I personally would have thought that the particle stream was
metal from the electrode being transfered via the arc's plasma
rather like when welding ( small spherical beads that form ,
especially when using welding rods )
I have not yet carried out the experiment as you described so at this
point i cannot comment further
Regards
ron
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
International Alternative Energy Center © 2000-2009 ForumCo.com Go To Top Of Page
This page was generated in 0.22 seconds. Snitz Forums 2000
RSS Feed 1 RSS Feed 2
Powered by ForumCo 2000-2008
TOS - AUP - URA - Privacy Policy
ForumCo Free Blogs and Galleries
Signup for a free forum or Go Banner Free