International Alternative Energy Center
International Alternative Energy Center
Home | Profile | Register | Active Topics | Active Polls | Members | Private Messages | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?




 All Forums
 Forums
 Transformers, Generators and Electric Motors.
 Delanco's VAWT
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

totoalas
Junior Member


Macao
168 Posts

Posted - September 04 2013 :  20:00:50  Show Profile Send totoalas a Private Message  Reply with Quote
You must be logged in to see this link.

Hi Kyle
have you have an update / or sketch/ circuit set up by Mr Delanco
My idea is to link with a pulse rotor in place of wind gen
thanks

Google AdSense

USA
Mountain View


kcarring
Moderator



Canada
1057 Posts

Posted - September 05 2013 :  12:52:14  Show Profile Send kcarring a Private Message  Reply with Quote
hey totoalas,

No update, haven't spoken to Mr. Delanco in a couple of years, had hoped to build something before I hit him with more questions.

To capture his concept the basics, are:

Within the drive mechanism of a low rpm prime mover, you use a transmission to spin the main rotor (PMA) much faster than your input rpm (transmission).

At another point in the drivebelt, (and not effected by the main transmission, and thus running slower) you run a DC generator (not a second permanent magnet alternator, or alternator...) -- for example one found in a very old truck, or a low rpm high torque gearbox dc motor.

From the stator (of your main permanent magnet alternator) COIL 1 output goes to the input of the DC generator. DC generator output goes to coil 2 of PMA stator.

Very bizarre

Cheers

~~~~~~~~~~~~~
You wouldn't laugh at my igloo if you knew how cold my beer is!

Edited by - kcarring on September 05 2013 12:53:21
Go to Top of Page

totoalas
Junior Member



Macao
168 Posts

Posted - September 05 2013 :  13:31:00  Show Profile Send totoalas a Private Message  Reply with Quote
Thanks Kyle
I will start collecting the parts and hopefully replicate his work
Go to Top of Page

kcarring
Moderator



Canada
1057 Posts

Posted - September 05 2013 :  14:43:18  Show Profile Send kcarring a Private Message  Reply with Quote
Totoalas,

When you get something together, make an actual written out on paper diagram of your circuit... and do a demo video, and then request to Mr. Delanco that he have a look at it, and see whether it is in essence the same concept as his (if you end up trying to replicate the DC/AC combined power wave).

Cheers

~~~~~~~~~~~~~
You wouldn't laugh at my igloo if you knew how cold my beer is!
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
International Alternative Energy Center © 2000-2009 ForumCo.com Go To Top Of Page
This page was generated in 0.22 seconds. Snitz Forums 2000
RSS Feed 1 RSS Feed 2
Powered by ForumCo 2000-2008
TOS - AUP - URA - Privacy Policy
ForumCo Free Blogs and Galleries
Signup for a free forum or Go Banner Free